Microwelding and various sampling for materials science and geoscience
Application Image

|
Application movies
|

- ■Conductive property paste of 10μm tip tungsten is available to repair the wiring pattern.
- ・Sapmle:Printed board
- ・Tool:Tungsten probe
- ・Application:Apply of conductive property paste.
|

- ■Spot welding offers suitable parameter for 30μm wire welding.
- ・Sapmle:Wire
- ・Application:Spolt welding of 30μm wire.
|

- ■Axis Pro software controls enables Z axis motion to synchronize the sequential liquid application.
- ・Sapmle:Aqueous ink for inkjet printer
- ・Tool:Micro injector and Micro Pipette
- ・Application:Sequencial liquid application of dia. 100μm degrees liquid.
|

- ■Axis Pro software controls tweezers opening / closing and movement.
- ・Sapmle:Metal hard-wiring
- ・Tool:Electronic Microtweezer Tool Set
- ・Application:Grasp 100μm or less wiring and transfer to the arbitrarily displaced location.
|

- ■Axis Pro software controls tweezers opening / closing and movement.
- ・Sapmle:Mineral grains
- ・Tool:Electronic Microtweezer Tool Set
- ・Application:Grasp the 100μm or less mineral grains and transfer to the arbitrarily displaced location.
|

- ■Available to grasp tightly 3μm wire and 30μm mineral grain.
- ・Sapmle:W-wire / Mineral grains
- ・Tool:Microtweezer Tool Set
- ・Application:Grasp and transfer samples.
|

- ■Micromanipulator makes it possible to control the size which is impossible by hand-held.
- ・Sapmle:Silica grain / Aqueous ink
- ・Tool:Micro Pipette
- ・Application:Liquid adsorbtion
|

- ■Micro tweezers applicable to pick up and transfer micro level device precisely.
- ・Sample:Semiconductoer material
- ・Tool:Microtweezer Tool Set
- ・Application:Electric device pick up and transfer
|