Sphere Vice
Angle adjustment after fixation can be performed freely
- Also after fixing a sample, it is the spherical vice which can change a vice-angle briskly.
- Since a base made from rubber, the fixation stable at arbitrary angles is possible for it.
- Since a vice-opening-and-closing handle is a removal type, it becomes very compact at the time of use.
Specification
| Maximum width | 17mm |
|---|---|
| Maximum depth | 8mm |
| Weight | 95g |
Lineup
| Sphere Vices | SV-1 | Angle adjustment after fixation can be performed freely. |
|---|
Application
 Isolation of μm-size particles for FT-IR, Raman and SEM |
| Scraping thin sections of material from a surface |
| Microwelding and various sampling for materials science and geoscience |
| Ex-situ FIB lift-out |
| Sample marking for SEM |
| DAC loading for high pressure |
News&Topics
| Suitable for accessing the embedded substance in resins and other materials.() |
| Stand-alone Micromanipulator – Easy set up with your microscope() |
| Suitable for welding small electrical wires() |
| Microsampling application for semiconductor customers() |
| Simple marking of small object on sample() |
-
Resolves an issue related to particulate sampling. Knowledgeable staff will answer. -
If you would like to consider the introduction, already your material for those of you can see immediately.
Micro Support Co.,Ltd.
1-3-19 Sikiji,Suruga-ku, Shizuoka-City,Shizuoka 422-8036,Japan
Phone ＋81-54-269−5002
FAX ＋81-54-269−5003
|
|
Copyright (C) 2015 microsupport.co.jp All right reserved.